![]()
![]()
Boss Zenith
Ascend to the apex, reign supreme over all.
An aerodynamic marvel, freshly conceived and meticulously honed.
A sublime cycling odyssey, where velocity becomes effortless grace.
An innovative featherweight creation, embodying the liberating essence of the breeze.
A stealthy ally on the circuit forged solely for the pursuit of the exceptional.
Features
Integrated:1-1/2 inch large bearing paired with a standard 28.6mm steerer tube on the fork provides ample space for routing cables.
Aerodynamic: The aerodynamic shape has been optimized through Large Eddy Simulation (LES) and Computational Fluid Dynamics (CFD) simulation using ANSYS software. At the zenith of aerodynamics, the design of this model approaches the very limits set by UCI regulations. Every detail has been meticulously crafted to ensure minimal air resistance. From the flattened headtube to the extra-wide seatstays, every curve and line is dedicated to achieving the ultimate aerodynamic performance.
TCF Tech manufacture:
The frame is made using TCF-TeXtreme Carbon Fabrics, achieving greater lightness without compromising stiffness or strength, and also improving impact resistance and surface smoothness. The blind carbon fibers in the TeXtreme Spread Tow (less than 0.05 mm per layer) thin layers suppress or delay the initiation of cracks in the composite structure under load. Preventing cracking and damage when subjected to higher loads, results in superior performance of the composite material.
NACA Tube Design: The NACA (National Advisory Committee for Aeronautics) Kamm Tail airfoil section tubing, inspired by aircraft wing profiles, features a truncated end that is cut off sharply near the trailing edge. This combination of airfoil design with a Kamm tail, similar to the currently popular D-shaped tubing, offers superior aerodynamic performance by efficiently slicing through the air.
Specification
- Frame: Bross Zenith Carbon 12×142mm thru-axle, Flat Mount Disc
- Fork: Bross Zenith Carbon 12×100mm thru-axle, Flat Mount Disc
- Shifter: Shimano 105 R7150 12-speed
- Front derailleur: Shimano 105 R7150 Di2,braze-on,2×12 speed
- Rear derailleur: Shimano105 R7150 Di2 12 speed
- Crank: Shimano 105 FC-R7100,50-34T
- Cassette: Shimano 105 CS-R7101,11-34T, 12-speed
- Chain: Shimano CN-M6100
- Bottom Bracket: BSA BB68
- Brake: Shimano 105 R7170 Hydraulic Disc Brake
- Brake Rotor: Shimano RT10,Center Lock,160mm
- Wheelset: Bross BRW-7D alloy, tubeless ready
- Tire: Continental Ultra Sport 3 700X25C
- Saddle: Bross road width saddle
- Handlebars: Bross Carbon Integrated Handlebar
- Seat Post: Bross Zenith aero carbon Seatpost, Di2-compatible
- Pedal: Excluding
- Weight: 8.9 kg in the M size
Size Chart:
- XXS:150-160cm
- XS:158-167cm
- S:165-174cm
- M:172-180cm
- L:178-185cm
- XL:182-190cm
- XXL:188-200cm
Geometry
default handlebar size
- XXS:360*80 mm
- XS:380*90 mm
- S:400*90 mm
- M:400*110 mm
- L:420*110 mm
- XL:420*120 mm
- XXL:420*130mm
Warranty.
From the date of purchase, the warranty period for each part is as follows:
Frameset: 5-year warranty under the non-human-caused damage or accident
Front and rear derailleurs: 6-month warranty under the non-human-caused damage or accident
Other Components: Wheels, saddle, shifters, cassette, crankset, hubs, handlebar, seatpost, brakes, suspension, bottom bracket - 6-month free warranty under the non-human-caused damage or accident
The wearable parts not listed above, such as inner tubes and tires, chains, cables, brake pads, brake hose and cables, shifter hose, and cables, etc. do not provide a free warranty.
During the warranty period, if the following circumstances cause damage, the Bross does not provide a warranty, and BROSS dealers can provide paid maintenance services.
Wrongly installed or misused by the provisions of this manual; (such as carrying persons, etc. exceeding the provisions)
Not properly maintained by this manual;
Exceeding the scope of the bicycle; (for example, using a road bike for mountain off-road)
Natural disasters and other irresistible situations;
There is a problem with the parts that a non-BROSS dealer has repaired:
After modification or change of the original factory configuration, and problems with the requirements of other companies:
Other parts damage and failure caused by the failure to replace the wearable parts in time.